butterfly valves supplier butterfly valves supplier
butterfly valves supplier

-Chemistry Plants
- Powder Transfer Plant
- Paper Manufacture Pland Field
- Dry Power
- Food and Beverage
- Power Plants(Pulverizer/Burner Side/ASH Handling System/FGD)

Connection Flange
- 24 inch and smaller valves conform to ANSI 16.5
- 26 inch and larger valves conform to API 605 or MSS SP-44
  (ANSI B 16.47 series A or series B). Holes tapped.
- Designed to handle heavy slurry, pulp stock and corrsive fluids in process industries.
- MSS SP-81 for wafer type knife gate valves.
- These high quality metal seated knife valves with ground knife gates and lapped seating face have maximum leakage rated
  4-10 times less than the permissible rates shown in TAPPL 405-8 & MSS SP-81.
- Available with lever, chain, gear, electric, air or hydraulic actuation.

butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. butterfly valves are generally favored because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.

butterfly valve is from a family of valves called quarter-turn valves. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
There are different kinds of butterfly valves, each adapted for different pressures and different usage. The resilient butterfly valve, which uses the flexibility of rubber, has the lowest pressure rating. The high performance butterfly valve, used in slightly higher-pressure systems, features a slight offset in the way the disc is positioned, which increases the valve's sealing ability and decreases its tendency to wear. The valve best suited for high-pressure systems is the triple offset butterfly valve, which makes use of a metal seat and is therefore able to withstand a greater amount of pressure.